CBM Heating and Air Conditioning Tune-Ups

Our experience confirms that servicing your heating and air conditioning equipment on a regular basis can reduce breakdowns and lower utility bills by 30%. Our maintenance plans help you avoid unexpected repair bills, reduced operating costs and maintain the highest efficiency from your heating and cooling system. Precision tune-ups are performed by our expert technicians. At your convenience, we’ll send one of our technicians to your home or business to perform a comprehensive inspection.

Custom Service Agreements

CBM Heating & Air Conditioning service programs help you protect your financial investment, maintain equipment capacity during the operating season, reduce operating costs, prevent interruptions and prolong the life of your equipment.

We service all makes and models of heating and air conditioning equipment.

We develop custom service agreements to fit your families needs. Schedule an appointment with CBM Heating & Air Conditioning to develop your custom annual service agreement.

Heating Tune-Up

Check Carbon Monoxide Exchanger (Gas)
Clean Burners and Heat Exchanger
Clean and Service Oil Burner (Oil)
Lubricate Motors as Required
Check all Safety Controls
Vacuum Smoke Pipe & Chimney Base (Oil)
Inspect Flue for Property Draft (Gas)
Clean and Adjust Pilot Assembly (Gas)
Check and Adjust Thermostat as Needed
Clean or Replace Nozzle as Needed (Oil)
Inspect Heat Exchanger for Cracks/Holes
Check Chimney for Obstructions
Check Draft Inducer
Check and Clean Blower Assembly
Check Temperature Rise
Check Belt and Adjust Tension
Check Gas Pressure
Check for Gas Leaks for Furnace

Cooling Tune-Up

Check Compressor Contractor
Check Refrigerant Charge (Adjust if Needed)
Lubricate Motors as Required
Clean or Replace Filters
Inspect for Freon Leaks
Tighten Electrical Connections
Check and Clean Condensate Lines
Check Condenser Coil
Check and Adjust Thermostat as Needed
Check AMP Draw on Motors
Check Compressor AMP Draw
Check and Clean Blower as Needed
Take Readings and Check for Proper Operation
Check Belt and Adjust Tension
Check and Adjust Superheat at Required
Check Start Capacitor and Relay
Check Temperature Difference/CFM
Check and Clean Condensate Pump
Check Evaporator Coil